Bootloader unter Ubuntu 7.04 ändern

Hallo,

wie ändere ich das optische Aussehen (z. Z. s/w DOS-ähnlich) des Bootloaders unter Ubuntu 7.04 und wie ändere ich das Windows Vista als erstes BS bootet?

Danke

 

Ich mache es so !

Werde /root und gehe mit dem vi in /boot/grub/menu.ist und ändere die

Reihenfoge oder das Aussehen nach meine Wünschen :-)

end of file

bk2

 

...ich hätte gern eine weiße Schrift auf blauen Grund und nur zwei Einträge 1. Windows Vista (als Standart) 2. Ubuntu 7.04.

Wie, wo, was muss ich entsprechend ändern...?

Die Menu.ist sieht so aus:

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=a0f5ba8d-03e6-4e76-8953-c6f0032e25cc ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd1,8)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=de_DE

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title Ubuntu, kernel 2.6.20-16-generic
root (hd1,8)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=a0f5ba8d-03e6-4e76-8953-c6f0032e25cc ro quiet splash locale=de_DE
initrd /boot/initrd.img-2.6.20-16-generic
quiet
savedefault

title Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root (hd1,8)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=a0f5ba8d-03e6-4e76-8953-c6f0032e25cc ro single
initrd /boot/initrd.img-2.6.20-16-generic

title Ubuntu, kernel 2.6.20-15-generic
root (hd1,8)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=a0f5ba8d-03e6-4e76-8953-c6f0032e25cc ro quiet splash locale=de_DE
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault

title Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd1,8)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=a0f5ba8d-03e6-4e76-8953-c6f0032e25cc ro single
initrd /boot/initrd.img-2.6.20-15-generic

title Ubuntu, memtest86+
root (hd1,8)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1

 

color cyan/blue white/blue ist der Farbeintrag in Grub, also die cyan/blue ist für nicht aktiven Hintergrund, Schriftfarbe ist white/blue.
es gibt noch die Option blink, Schrift blinkt dann im Bootmenue:
color cyan/blue blink-white/blue

es gibt eine Liste von Farben die Grub unterstützt, eventuell mal google anwerfen oder probieren