Brennschwierigkeiten

Hallo,

habe mehrmals versucht eine Sony DVD-R (16x) mit meinem NEC DVD-RW ND 1300A (Firmware 1.42) zu brennen. Es erscheint folgende Fehlermeldung: "Starten von Disc At Once Fehlgeschlagen!". Was könnte der Fehler sein?

Anbei habe ich die Log angehängt.

Danke

Windows XP 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.2
Internal Version: 7, 10, 1, 2

Recorder: <_NEC DVD_RW ND-1300A> Version: 1.42 - HA 1 TA 1 - 7.10.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0017 - HA 1 TA 0 - 7.10.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B I: CdRom0
_NEC DVD_RW ND-1300A J: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095552kB)
Free physical memory: 1189MB (1218228kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.2.2008
DVD-Image brennen
09:35:13 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

09:35:13 #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

09:35:13 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1170463 (260:06.13, 2286MB)

09:35:13 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

09:35:13 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

09:35:13 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:35:13 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1170464 (1170464) = #1170464/260:6.14
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1170464 blocks [J: _NEC DVD_RW ND-1300A]
--------------------------------------------------------------

09:35:13 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [J: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2397110272, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1170464 | 1170464 | 0x00
1170464 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

09:35:13 #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

09:35:13 #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

09:35:13 #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

09:35:13 #12 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

09:35:13 #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

09:35:13 #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11.080 KB/s)

09:35:13 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

09:35:13 #16 Text 0 File DVDR.cpp, Line 3229
Recording mode: Sequential Recording Mode

09:35:13 #17 Text 0 File DVDR.cpp, Line 3385
Start write address at LBA 0
DVD high compatibility mode: Yes

09:35:14 #18 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

09:35:14 #19 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 11 DC 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

09:35:14 #20 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752
Illegal disc
J: _NEC DVD_RW ND-1300A

09:35:14 #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once

09:35:14 #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

09:35:14 #23 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11.080 KB/s)

09:35:14 #24 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

09:35:17 #25 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

09:35:17 #26 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon