Externe Festplatte!

Hi Leute! Ich hab da ein blödes Problem: Meine Samsung Festplatte wird zwar unter Linux erkannt, doch nach zirka 1 - 2 Monaten fing sie an zu spinnen. Bei manchen dateien steht etwas von einem Input Output error, wenn ich sie verschieben, umbenennen oder löschen will. Und beim Dateiname ist manchmal so ein 4eckiges Feld, wo oben links, unten links, oben rechts und unten rechts Buchstaben oder Zahlen drinstehen. Hab schon unmounten und mounten versucht, sicher entfernen unter Windows, doch es hat nichts genützt. Hab dmesg in der Konsole eingegeben und da kam


[ 0.484019] libata version 3.00 loaded.
[ 0.484033] usbcore: registered new interface driver usbfs
[ 0.484053] usbcore: registered new interface driver hub
[ 0.484059] usbcore: registered new device driver usb
[ 0.484059] PCI: Using ACPI for IRQ routing
[ 0.488013] Bluetooth: Core ver 2.13
[ 0.492014] NET: Registered protocol family 31
[ 0.492014] Bluetooth: HCI device and connection manager initialized
[ 0.492016] Bluetooth: HCI socket layer initialized
[ 0.492018] NET: Registered protocol family 8
[ 0.492020] NET: Registered protocol family 20
[ 0.492029] NetLabel: Initializing
[ 0.492031] NetLabel: domain hash size = 128
[ 0.492033] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.492050] NetLabel: unlabeled traffic allowed by default
[ 0.492066] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.492070] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.496088] AppArmor: AppArmor Filesystem Enabled
[ 0.504022] Switched to high resolution mode on CPU 0
[ 0.504036] Switched to high resolution mode on CPU 1
[ 0.504051] pnp: PnP ACPI init
[ 0.504059] ACPI: bus type pnp registered
[ 0.506772] ACPI Error (dsopcode-0595): Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) [20080926]
[ 0.506779] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node f6c15900), AE_AML_BUFFER_LIMIT
[ 0.506817] ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node f6c15900), AE_AML_BUFFER_LIMIT
[ 0.506824] pnp 00:03: can't evaluate _CRS: 12298<6>pnp: PnP ACPI: found 12 devices
[ 0.508750] ACPI: ACPI bus type pnp unregistered
[ 0.508754] PnPBIOS: Disabled by ACPI PNP
[ 0.508764] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.508774] system 00:04: ioport range 0x360-0x361 has been reserved
[ 0.508777] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.508785] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.508788] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.508791] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.508794] system 00:0b: iomem range 0xfec80000-0xfec80fff has been reserved
[ 0.508797] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
[ 0.543523] pci 0000:00:08.0: PCI bridge, secondary bus 0000:07
[ 0.543525] pci 0000:00:08.0: IO window: disabled
[ 0.543529] pci 0000:00:08.0: MEM window: 0xf2100000-0xf21fffff
[ 0.543532] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.543536] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01
[ 0.543538] pci 0000:00:0b.0: IO window: disabled
[ 0.543541] pci 0000:00:0b.0: MEM window: disabled
[ 0.543543] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.543547] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.543549] pci 0000:00:0c.0: IO window: disabled
[ 0.543552] pci 0000:00:0c.0: MEM window: 0xf2000000-0xf20fffff
[ 0.543554] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.543559] pci 0000:05:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 0.543562] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
[ 0.543565] pci 0000:00:0d.0: IO window: 0x4000-0x4fff
[ 0.543568] pci 0000:00:0d.0: MEM window: 0xcc000000-0xceffffff
[ 0.543571] pci 0000:00:0d.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.543574] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:09
[ 0.543577] pci 0000:00:0e.0: IO window: 0x5000-0x5fff
[ 0.543580] pci 0000:00:0e.0: MEM window: 0xf0000000-0xf1ffffff
[ 0.543583] pci 0000:00:0e.0: PREFETCH window: 0x000000f2600000-0x000000f27fffff
[ 0.543592] pci 0000:00:08.0: setting latency timer to 64
[ 0.543597] pci 0000:00:0b.0: setting latency timer to 64
[ 0.543602] pci 0000:00:0c.0: setting latency timer to 64
[ 0.543606] pci 0000:00:0d.0: setting latency timer to 64
[ 0.543611] pci 0000:00:0e.0: setting latency timer to 64
[ 0.543614] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.543616] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.543619] bus: 07 index 0 mmio: [0x0-0x0]
[ 0.543621] bus: 07 index 1 mmio: [0xf2100000-0xf21fffff]
[ 0.543623] bus: 07 index 2 mmio: [0x0-0x0]
[ 0.543625] bus: 07 index 3 io port: [0x00-0xffff]
[ 0.543627] bus: 07 index 4 mmio: [0x000000-0xffffffff]
[ 0.543630] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.543632] bus: 01 index 1 mmio: [0x0-0x0]
[ 0.543633] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.543635] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.543637] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.543639] bus: 03 index 1 mmio: [0xf2000000-0xf20fffff]
[ 0.543642] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.543643] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.543646] bus: 05 index 0 io port: [0x4000-0x4fff]
[ 0.543648] bus: 05 index 1 mmio: [0xcc000000-0xceffffff]
[ 0.543650] bus: 05 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.543652] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.543654] bus: 09 index 0 io port: [0x5000-0x5fff]
[ 0.543657] bus: 09 index 1 mmio: [0xf0000000-0xf1ffffff]
[ 0.543659] bus: 09 index 2 mmio: [0xf2600000-0xf27fffff]
[ 0.543661] bus: 09 index 3 mmio: [0x0-0x0]
[ 0.543672] NET: Registered protocol family 2
[ 0.553088] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.553385] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.554168] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.554614] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.554616] TCP reno registered
[ 0.557121] NET: Registered protocol family 1
[ 0.557256] checking if image is initramfs... it is
[ 1.137825] Freeing initrd memory: 7380k freed
[ 1.137860] Simple Boot Flag at 0x36 set to 0x1
[ 1.138027] cpufreq: No nForce2 chipset.
[ 1.138160] audit: initializing netlink socket (disabled)
[ 1.138174] type=2000 audit(1251131102.136:1): initialized
[ 1.146133] highmem bounce pool size: 64 pages
[ 1.146139] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.147405] VFS: Disk quotas dquot_6.5.1
[ 1.147465] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.148051] fuse init (API version 7.10)
[ 1.148122] msgmni has been set to 1672
[ 1.148316] alg: No test for stdrng (krng)
[ 1.148327] io scheduler noop registered
[ 1.148329] io scheduler anticipatory registered
[ 1.148331] io scheduler deadline registered
[ 1.148346] io scheduler cfq registered (default)
[ 1.148377] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.148497] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.148512] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.148548] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.148564] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.148580] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.148595] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.148631] pci 0000:05:00.0: Boot video device
[ 1.155848] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.155873] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.155890] pcieport-driver 0000:00:0b.0: irq 2303 for MSI/MSI-X
[ 1.155896] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.155910] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.155946] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.155968] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.155980] pcieport-driver 0000:00:0c.0: irq 2302 for MSI/MSI-X
[ 1.155987] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.155998] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.156033] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.156056] pcieport-driver 0000:00:0d.0: found MSI capability
[ 1.156068] pcieport-driver 0000:00:0d.0: irq 2301 for MSI/MSI-X
[ 1.156077] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 1.156090] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 1.156124] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.156147] pcieport-driver 0000:00:0e.0: found MSI capability
[ 1.156159] pcieport-driver 0000:00:0e.0: irq 2300 for MSI/MSI-X
[ 1.156165] pci_express 0000:00:0e.0:pcie00: allocate port service
[ 1.156177] pci_express 0000:00:0e.0:pcie03: allocate port service
[ 1.156226] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.156236] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.158014] ACPI: AC Adapter [ACAD] (on-line)
[ 1.433886] ACPI: Battery Slot [BAT0] (battery present)
[ 1.433969] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.433972] ACPI: Power Button (FF) [PWRF]
[ 1.434017] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.435851] ACPI: Lid Switch [LID]
[ 1.435908] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.435910] ACPI: Power Button (CM) [PWRB]
[ 1.435954] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.435957] ACPI: Sleep Button (CM) [SLPB]
[ 1.436258] ACPI: processor limited to max C-state 1
[ 1.436283] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.436310] processor ACPI_CPU:00: registered as cooling_device0
[ 1.436314] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.436424] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.436445] processor ACPI_CPU:01: registered as cooling_device1
[ 1.436448] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.698856] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20080926]
[ 1.698910] isapnp: Scanning for PnP cards...
[ 2.051520] isapnp: No Plug & Play device found
[ 2.065251] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.066174] brd: module loaded
[ 2.066479] loop: module loaded
[ 2.066546] Fixed MDIO Bus: probed
[ 2.066552] PPP generic driver version 2.4.2
[ 2.066611] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.066639] Driver 'sd' needs updating - please use bus_type methods
[ 2.066648] Driver 'sr' needs updating - please use bus_type methods
[ 2.066686] ahci 0000:00:0a.0: version 3.0
[ 2.067030] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[ 2.067041] ahci 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 23 (level, low) -> IRQ 23
[ 2.067131] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 2.067134] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pmp pio
[ 2.067138] ahci 0000:00:0a.0: setting latency timer to 64
[ 2.067639] scsi0 : ahci
[ 2.067778] scsi1 : ahci
[ 2.067868] scsi2 : ahci
[ 2.067952] scsi3 : ahci
[ 2.068054] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
[ 2.068057] ata2: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484180 irq 23
[ 2.068059] ata3: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484200 irq 23
[ 2.068062] ata4: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484280 irq 23
[ 2.956030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.956408] ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 8909, max UDMA/100
[ 2.956411] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.956898] ata1.00: configured for UDMA/100
[ 3.292030] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.628027] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.964026] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.980145] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2320B 8909 PQ: 0 ANSI: 5
[ 3.980235] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.980253] sd 0:0:0:0: [sda] Write Protect is off
[ 3.980255] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.980280] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.980356] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.980370] sd 0:0:0:0: [sda] Write Protect is off
[ 3.980372] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.980395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.980399] sda: sda1 sda2 < sda5 >
[ 4.080505] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.080563] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.080800] pata_amd 0000:00:09.0: version 0.3.10
[ 4.080846] pata_amd 0000:00:09.0: setting latency timer to 64
[ 4.080936] scsi4 : pata_amd
[ 4.081022] scsi5 : pata_amd
[ 4.081662] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 4.081665] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 4.244309] ata5.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2
[ 4.244333] ata5: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[ 4.260255] ata5.00: configured for MWDMA2
[ 4.260654] ata6: port disabled. ignoring.
[ 4.261537] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7561A GH09 PQ: 0 ANSI: 5
[ 4.266698] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.266701] Uniform CD-ROM driver Revision: 3.20
[ 4.266807] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.266845] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.267328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.267671] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
[ 4.267682] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
[ 4.267703] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 4.267706] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 4.267765] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 4.267793] ehci_hcd 0000:00:02.1: debug port 1
[ 4.267797] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 4.267816] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf2488000
[ 4.276030] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 4.276100] usb usb1: configuration #1 chosen from 1 choice
[ 4.276126] hub 1-0:1.0: USB hub found
[ 4.276134] hub 1-0:1.0: 10 ports detected
[ 4.276244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.276561] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[ 4.276569] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
[ 4.276580] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 4.276583] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 4.276635] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 4.276657] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf2486000
[ 4.334059] usb usb2: configuration #1 chosen from 1 choice
[ 4.334085] hub 2-0:1.0: USB hub found
[ 4.334094] hub 2-0:1.0: 10 ports detected
[ 4.334184] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.334262] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 4.361783] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.361790] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.364054] mice: PS/2 mouse device common for all mice
[ 4.385090] rtc_cmos 00:07: RTC can wake from S4
[ 4.385126] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 4.385165] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 4.385224] device-mapper: uevent: version 1.0.3
[ 4.385337] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 4.385509] device-mapper: multipath: version 1.0.5 loaded
[ 4.385512] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.385623] EISA: Probing bus 0 at eisa.0
[ 4.385629] Cannot allocate resource for EISA slot 1
[ 4.385634] Cannot allocate resource for EISA slot 3
[ 4.385637] Cannot allocate resource for EISA slot 4
[ 4.385639] Cannot allocate resource for EISA slot 5
[ 4.385649] EISA: Detected 0 cards.
[ 4.385797] cpuidle: using governor ladder
[ 4.385855] cpuidle: using governor menu
[ 4.386343] TCP cubic registered
[ 4.386434] NET: Registered protocol family 10
[ 4.386837] lo: Disabled Privacy Extensions
[ 4.387143] NET: Registered protocol family 17
[ 4.387160] Bluetooth: L2CAP ver 2.11
[ 4.387162] Bluetooth: L2CAP socket layer initialized
[ 4.387165] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.387166] Bluetooth: SCO socket layer initialized
[ 4.387221] Bluetooth: RFCOMM socket layer initialized
[ 4.387228] Bluetooth: RFCOMM TTY layer initialized
[ 4.387230] Bluetooth: RFCOMM ver 1.10
[ 4.387285] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
[ 4.387331] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x11
[ 4.387334] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
[ 4.387336] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13
[ 4.387338] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 4.387390] Using IPI No-Shortcut mode
[ 4.387478] registered taskstats version 1
[ 4.387620] Magic number: 5:886:439
[ 4.387740] rtc_cmos 00:07: setting system clock to 2009-08-24 16:25:06 UTC (1251131106)
[ 4.387743] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.387745] EDD information not available.
[ 4.388141] Freeing unused kernel memory: 532k freed
[ 4.388291] Write protecting the kernel text: 4116k
[ 4.388342] Write protecting the kernel read-only data: 1528k
[ 4.404026] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.598366] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 4.837991] usb 1-4: configuration #1 chosen from 1 choice
[ 4.862531] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 4.862910] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 4.862922] forcedeth 0000:00:06.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 4.862927] forcedeth 0000:00:06.0: setting latency timer to 64
[ 4.884340] ohci1394 0000:07:05.0: enabling device (0100 -> 0102)
[ 4.884698] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[ 4.884712] ohci1394 0000:07:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5
[ 4.936469] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f2100000-f21007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 5.224029] usb 2-7: new low speed USB device using ohci_hcd and address 2
[ 5.381222] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:6c:66:3b
[ 5.381226] forcedeth 0000:00:06.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 5.439579] usb 2-7: configuration #1 chosen from 1 choice
[ 5.447507] usbcore: registered new interface driver hiddev
[ 5.457348] input: HID 04d9:048e as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input6
[ 5.459571] PM: Starting manual resume from disk
[ 5.459574] PM: Resume from partition 8:5
[ 5.459576] PM: Checking hibernation image.
[ 5.459686] generic-usb 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:02.0-7/input0
[ 5.459705] usbcore: registered new interface driver usbhid
[ 5.459712] usbhid: v2.6:USB HID core driver
[ 5.459739] PM: Resume from disk failed.
[ 5.513356] kjournald starting. Commit interval 5 seconds
[ 5.513367] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.213127] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b007bebf600]
[ 6.377281] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 6.521170] usb 1-2: configuration #1 chosen from 1 choice
[ 10.447597] udev: starting version 141
[ 10.744587] acpi device:29: registered as cooling_device2
[ 10.744767] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:26/device:27/input/input7
[ 10.769149] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.809670] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 10.809710] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 11.066775] Initializing USB Mass Storage driver...
[ 11.068089] usb-storage: probe of 1-2:1.0 failed with error -5
[ 11.068147] usb-storage: probe of 1-2:1.1 failed with error -5
[ 11.068740] usb-storage: probe of 1-2:1.2 failed with error -1
[ 11.069610] usb-storage: probe of 1-2:1.3 failed with error -1
[ 11.069638] usbcore: registered new interface driver usb-storage
[ 11.069642] USB Mass Storage support registered.
[ 11.089764] sdhci: Secure Digital Host Controller Interface driver
[ 11.089767] sdhci: Copyright(c) Pierre Ossman
[ 11.092732] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 22)
[ 11.093123] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[ 11.093136] sdhci-pci 0000:07:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
[ 11.096343] mmc0: SDHCI controller on PCI [0000:07:05.1] using PIO
[ 11.102687] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 11.102691] ricoh-mmc: Copyright(c) Philip Langdale
[ 11.102725] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 12)
[ 11.102738] ricoh-mmc: Controller is now disabled.
[ 11.194239] Linux video capture interface: v2.00
[ 11.276916] Linux agpgart interface v0.103
[ 11.294169] usbcore: registered new interface driver usbserial
[ 11.294207] USB Serial support registered for generic
[ 11.294281] usbcore: registered new interface driver usbserial_generic
[ 11.294283] usbserial: USB Serial Driver core
[ 11.313569] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 11.328840] USB Serial support registered for GSM modem (1-port)
[ 11.328895] option 1-2:1.0: GSM modem (1-port) converter detected
[ 11.329042] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 11.329054] option 1-2:1.1: GSM modem (1-port) converter detected
[ 11.329140] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 11.329160] usbcore: registered new interface driver option
[ 11.329163] option: v0.7.2:USB Driver for GSM modems
[ 11.390162] cfg80211: Calling CRDA to update world regulatory domain
[ 11.541385] cfg80211: World regulatory domain updated:
[ 11.541390] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.541393] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.541396] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.541398] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.541401] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.541404] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.585532] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 12.010423] nvidia: module license 'NVIDIA' taints kernel.
[ 12.065484] uvcvideo: Found UVC 1.00 device HP Webcam (0c45:62c0)
[ 12.067531] input: HP Webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/input/input9
[ 12.209502] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16
[ 12.209515] ath5k_pci 0000:03:00.0: PCI INT A -> Link[LK1E] -> GSI 16 (level, low) -> IRQ 16
[ 12.209524] ath5k_pci 0000:03:00.0: setting latency timer to 64
[ 12.209660] ath5k_pci 0000:03:00.0: registered as 'phy0'
[ 12.265764] phy0: Selected rate control algorithm 'pid'
[ 12.268570] nvidia 0000:05:00.0: power state changed by ACPI to D0
[ 12.268921] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 12.268933] nvidia 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
[ 12.268941] nvidia 0000:05:00.0: setting latency timer to 64
[ 12.269246] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.14 Wed May 27 02:23:13 PDT 2009
[ 12.270681] usbcore: registered new interface driver uvcvideo
[ 12.270707] USB Video Class driver (v0.1.0)
[ 12.354594] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 12.399777] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 12.399790] HDA Intel 0000:00:07.0: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 12.399863] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 12.649685] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000
[ 12.727012] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 13.036330] lp: driver loaded but no devices found
[ 13.141277] Adding 9068652k swap on /dev/sda5. Priority:-1 extents:1 across:9068652k
[ 13.680401] EXT3 FS on sda1, internal journal
[ 14.923991] type=1505 audit(1251131117.033:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2188
[ 14.976909] type=1505 audit(1251131117.085:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2192
[ 14.977083] type=1505 audit(1251131117.089:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2192
[ 14.977137] type=1505 audit(1251131117.089:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2192
[ 14.977188] type=1505 audit(1251131117.089:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2192
[ 15.131030] type=1505 audit(1251131117.241:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2197
[ 15.131244] type=1505 audit(1251131117.241:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2197
[ 15.162421] type=1505 audit(1251131117.273:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2201
[ 22.704903] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.704907] Bluetooth: BNEP filters: protocol multicast
[ 22.763871] Bridge firewalling registered
[ 24.162314] ppdev: user-space parallel port driver
[ 27.896832] eth0: no link during initialization.
[ 27.897334] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.758783] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 87.001030] Clocksource tsc unstable (delta = -100425667 ns)
[ 106.330044] PPP BSD Compression module registered
[ 106.338443] PPP Deflate Compression module registered
[ 117.600040] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 117.735085] usb 1-6: configuration #1 chosen from 1 choice
[ 117.736121] scsi10 : SCSI emulation for USB Mass Storage devices
[ 117.736517] usb-storage: device found at 5
[ 117.736522] usb-storage: waiting for device to settle before scanning
[ 122.737388] usb-storage: device scan complete
[ 122.739344] scsi 10:0:0:0: Direct-Access SAMSUNG HD154UI PQ: 0 ANSI: 2 CCS
[ 122.744071] sd 10:0:0:0: [sdb] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
[ 122.746333] sd 10:0:0:0: [sdb] Write Protect is off
[ 122.746342] sd 10:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 122.746348] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 122.759817] sd 10:0:0:0: [sdb] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
[ 122.766088] sd 10:0:0:0: [sdb] Write Protect is off
[ 122.766100] sd 10:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 122.766106] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 122.766125] sdb: sdb1
[ 123.100091] sd 10:0:0:0: [sdb] Attached SCSI disk
[ 123.100266] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 372.203629] usb 1-6: USB disconnect, address 5
[ 404.832042] usb 1-6: new high speed USB device using ehci_hcd and address 6
[ 404.966665] usb 1-6: configuration #1 chosen from 1 choice
[ 404.967619] scsi11 : SCSI emulation for USB Mass Storage devices
[ 404.968008] usb-storage: device found at 6
[ 404.968014] usb-storage: waiting for device to settle before scanning
[ 409.968842] usb-storage: device scan complete
[ 409.970878] scsi 11:0:0:0: Direct-Access SAMSUNG HD154UI PQ: 0 ANSI: 2 CCS
[ 409.973563] sd 11:0:0:0: [sdb] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
[ 409.976614] sd 11:0:0:0: [sdb] Write Protect is off
[ 409.976623] sd 11:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 409.976629] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 409.980520] sd 11:0:0:0: [sdb] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
[ 409.981728] sd 11:0:0:0: [sdb] Write Protect is off
[ 409.981736] sd 11:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 409.981742] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 409.981758] sdb: sdb1
[ 410.321558] sd 11:0:0:0: [sdb] Attached SCSI disk
[ 410.321720] sd 11:0:0:0: Attached scsi generic sg2 type 0
patrick@patrick-laptop:~$


heraus.

Weiß jemand, was ich da tun kann?