1. Bitte immer die Rechnerkonfiguration komplett posten!
    Vollständige Angaben zur Konfiguration erleichtern die Hilfestellung und machen eine zügige Problemlösung wahrscheinlicher. Wie es geht steht hier: Klick.
    Dismiss Notice
  2. Liebe Forumsgemeinde,

    aufgrund der Bestimmungen, die sich aus der DSGVO ergeben, müssten umfangreiche Anpassungen am Forum vorgenommen werden, die sich für uns nicht wirtschaftlich abbilden lassen. Daher haben wir uns entschlossen, das Forum in seiner aktuellen Form zu archivieren und online bereit zu stellen, jedoch keine Neuanmeldungen oder neuen Kommentare mehr zuzulassen. So ist sichergestellt, dass das gesammelte Wissen nicht verloren geht, und wir die Seite dennoch DSGVO-konform zur Verfügung stellen können.
    Dies wird in den nächsten Tagen umgesetzt.

    Ich danke allen, die sich in den letzten Jahren für Hilfesuchende und auch für das Forum selbst engagiert haben. Ich bin weiterhin für euch erreichbar unter tti(bei)pcwelt.de.
    Dismiss Notice
Ergänzung Rechnerkonfiguration Wir stellen um auf Read only

HL-DT-ST DVDRAM GSA-4082B brennt plötzlich keine CD mehr, aber CD-RW

Discussion in 'Festplatten, SSD, USB-Sticks, CD/DVD/Blu-ray' started by webflash, Jan 14, 2007.

Thread Status:
Not open for further replies.
  1. webflash

    webflash ROM

    Ich habe nie Probleme gehabt mit dem Brennen von Musik- oder Daten-CD: SilverCycle, Philips, Fuji o. a..
    Jetzt brennt er plötzlich zwar noch CD-RW, aber keine Daten-CD . Habe IN-CD deinstalliert.

    Hier der Nero-Fehlerbericht (Could not perform EndTrack).
    Leider verstehe ich ihn nicht, erbitte Hilfe. Danke!

    __________________________________


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Programme\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 11:54:32

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    (Nero Express)
    Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A207 - HA 1 TA 1 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F504 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 7Y250P0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SAMSUNG DVD-ROM SD-616E E: CDRom0
    HL-DT-ST DVDRAM GSA-4082B F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (522992kB)
    Free physical memory: 75MB (77072kB)
    Memory in use : 85 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    14.1.2007
    CD-ROM (ISO)
    17:35:49 #1 Text 0 File Isodoc.cpp, Line 6475
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    17:35:49 #2 Text 0 File Burncd.cpp, Line 3012
    HL-DT-ST DVDRAM GSA-4082B
    Schutz vor Pufferleerlauf aktiviert

    17:35:49 #3 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 72704KB of Memory

    17:35:49 #4 Text 0 File Reader.cpp, Line 124
    Reader running

    17:35:49 #5 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4082B running

    17:35:49 #6 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    17:35:49 #7 Text 0 File Burncd.cpp, Line 3305
    Turn on Track-At-Once, using CD-R/RW media

    17:35:49 #8 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 265095 ( 58:56.45)

    17:35:49 #9 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    17:35:49 #10 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: HL-DT-ST DVDRAM GSA-4082B

    17:35:49 #11 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    17:35:49 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 265096 (265096) = #265096/58:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 265094 blocks [HL-DT-ST DVDRAM GSA-4082B]
    --------------------------------------------------------------

    17:35:49 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 543223808, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    265096 | lead-out | 1 | 0x41 | 0x00

    17:35:49 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
    Removed 2 run-out blocks from end of track 1. Length: 265096 -> 265094.

    17:35:49 #15 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    17:35:49 #16 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    17:35:49 #17 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    17:35:49 #18 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    17:35:49 #19 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    17:35:49 #20 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 24x (3.600 KB/s)

    17:35:50 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    17:35:50 #22 Text 0 File Mmc.cpp, Line 21840
    Set BUFE: Buffer underrun protection -> ON

    17:37:10 #23 SPTI -1039 File SCSIPassThrough.cpp, Line 289
    F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x01
    CDB Data: 0x2A 00 00 00 ED 80 00 00 20 00 00 00
    Sense Area: 0x70 00 04 00 00 00 00 10 34 10 04 80 09 01
    Buffer x0c1f0000: Len x10000
    0x53 95 0B F3 32 A0 25 59 98 33 63 21 77 30 FE 30
    0x58 F4 0B 6A 59 01 FB BB 42 12 DB 98 6D 71 B0 8F
    0xE2 20 82 73 B1 72 C4 7C 85 00 25 A9 5A CF 71 7C

    17:37:10 #24 CDR -1039 File Writer.cpp, Line 311
    Focus or tracking error
    F: HL-DT-ST DVDRAM GSA-4082B

    17:37:10 #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    17:37:10 #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    17:37:11 #27 SPTI -1039 File SCSIPassThrough.cpp, Line 289
    F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x01
    CDB Data: 0x35 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 04 00 00 00 00 10 34 10 04 80 09 01

    17:37:11 #28 CDR -1039 File WriterStatus.cpp, Line 197
    Focus or tracking error
    F: HL-DT-ST DVDRAM GSA-4082B

    17:37:11 #29 TRANSFER -18 File WriterStatus.cpp, Line 197
    Could not perform EndTrack

    17:37:11 #30 CDR -201 File WriterStatus.cpp, Line 200
    Invalid write state
    F: HL-DT-ST DVDRAM GSA-4082B

    17:37:11 #31 TRANSFER -18 File WriterStatus.cpp, Line 200
    Could not perform EndTrack

    17:37:11 #32 Text 0 File Mmc.cpp, Line 16608
    <HL-DT-STDVDRAM GSA-4082B> start Close Session

    17:37:11 #33 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 24x (3.600 KB/s)


    Existing drivers:
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 23.03.2006 16:15:58 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 23.03.2006 16:15:56 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 23.03.2006 16:00:28 (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    webflash, Jan 14, 2007
    #1
Thread Status:
Not open for further replies.

Share This Page