1. Bitte immer die Rechnerkonfiguration komplett posten!
    Vollständige Angaben zur Konfiguration erleichtern die Hilfestellung und machen eine zügige Problemlösung wahrscheinlicher. Wie es geht steht hier: Klick.
    Dismiss Notice
  2. Liebe Forumsgemeinde,

    aufgrund der Bestimmungen, die sich aus der DSGVO ergeben, müssten umfangreiche Anpassungen am Forum vorgenommen werden, die sich für uns nicht wirtschaftlich abbilden lassen. Daher haben wir uns entschlossen, das Forum in seiner aktuellen Form zu archivieren und online bereit zu stellen, jedoch keine Neuanmeldungen oder neuen Kommentare mehr zuzulassen. So ist sichergestellt, dass das gesammelte Wissen nicht verloren geht, und wir die Seite dennoch DSGVO-konform zur Verfügung stellen können.
    Dies wird in den nächsten Tagen umgesetzt.

    Ich danke allen, die sich in den letzten Jahren für Hilfesuchende und auch für das Forum selbst engagiert haben. Ich bin weiterhin für euch erreichbar unter tti(bei)pcwelt.de.
    Dismiss Notice
Ergänzung Rechnerkonfiguration Wir stellen um auf Read only

HL-DT-ST GWA-4040N Brenner in Fujuitsu Siemens Laptop

Discussion in 'Festplatten, SSD, USB-Sticks, CD/DVD/Blu-ray' started by Tsakali, Dec 7, 2006.

Thread Status:
Not open for further replies.
  1. Tsakali

    Tsakali ROM

    Hi,
    Ich hab folgendes Problem mein Brenner funktioniert plötzlich nicht mehr. Er liest CDs und DVDs noch aber er brennt nicht mehr. es kommt folgende Fehlermeldung:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Programme\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22.07.2004 17:33:44
    Nero Version: 6.3.1.20 (Nero Express)
    Recorder: <HL-DT-ST DVD-RW GWA-4040N>Version: 1.02 - HA 1 TA 1 - 6.3.1.20
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <UH3149M QFX122R >Version: 1.0 - HA 2 TA 0 - 6.3.1.20
    Adapter driver: <azepirdy> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHT2080AT atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040N atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : UH3149M QFX122R 1.0 azepirdy Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RW GWA-4040 E: CDRom0
    UH3149M QFX122R F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 153MB (157252kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.12.2006
    CD-ROM (ISO)
    20:26:14 #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    20:26:14 #2 Phase 90 File dlgbrnst.cpp, Line 1855
    Buffer Underrun Protection activated

    20:26:14 #3 Text 0 File Reader.cpp, Line 126
    Reader running

    20:26:14 #4 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVD-RW GWA-4040N running

    20:26:14 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    20:26:14 #6 Text 0 File Burncd.cpp, Line 3173
    Turn on Track-at-Once, using CD-R/RW media

    20:26:14 #7 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 359844 ( 79:59.69)
    Last address to be written: 242052 ( 53:49.27)

    20:26:14 #8 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    20:26:14 #9 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: HL-DT-ST DVD-RW GWA-4040N;
    CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
    ATIP Data:
    Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

    20:26:14 #10 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    20:26:14 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 242053 (242053) = #242053/53:47.28
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 242051 blocks [HL-DT-ST DVD-RW GWA-4040N]
    --------------------------------------------------------------

    20:26:14 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HL-DT-ST DVD-RW GWA-4040N] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 496031744, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    242053 | lead-out | 1 | 0x00 | 0x41

    20:26:14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
    Removed 2 run-out blocks from end of track 1. Length: 242053 -> 242051.

    20:26:14 #14 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    20:26:14 #15 Text 0 File Burncd.cpp, Line 4183
    Cache writing successful.

    20:26:14 #16 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    20:26:14 #17 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 16x (2.400 KB/s)

    20:26:14 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:26:14 #19 Text 0 File Mmc.cpp, Line 20513
    Set BUFE: supported -> ON

    20:26:26 #20 SCSI -1119 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A7A0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x09 0x00

    20:26:26 #21 CDR -1119 File Writer.cpp, Line 304
    Track following error

    20:26:26 #22 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    20:26:26 #23 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    20:26:26 #24 CDR -201 File WriterStatus.cpp, Line 196
    Invalid write state
    HL-DT-ST DVD-RW GWA-4040N\H1 T1

    20:26:26 #25 TRANSFER -18 File WriterStatus.cpp, Line 196
    Could not perform EndTrack

    20:26:26 #26 Text 0 File Mmc.cpp, Line 15338
    <HL-DT-STDVD-RW GWA-4040N> start Close Session

    20:26:26 #27 SCSI -1026 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x2C
    Sense Qual: 0x04
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x2C 0x04

    20:26:26 #28 CDR -1026 File WriterStatus.cpp, Line 245
    Current program area empty

    20:26:26 #29 TRANSFER -19 File WriterStatus.cpp, Line 245
    Could not perform Fixation

    20:26:26 #30 Text 0 File WriterStatus.cpp, Line 254
    falling back to disc fixation

    20:26:26 #31 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    20:26:26 #32 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 16x (2.400 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04.08.2004 06:59:42 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    kann mir da jemand weiterhelfen??

    Vielen Dank schonmal im Vorraus

    Gruß Tsakali
     
    Tsakali, Dec 7, 2006
    #1
Thread Status:
Not open for further replies.

Share This Page