1. Bitte immer die Rechnerkonfiguration komplett posten!
    Vollständige Angaben zur Konfiguration erleichtern die Hilfestellung und machen eine zügige Problemlösung wahrscheinlicher. Wie es geht steht hier: Klick.
    Dismiss Notice
  2. Liebe Forumsgemeinde,

    aufgrund der Bestimmungen, die sich aus der DSGVO ergeben, müssten umfangreiche Anpassungen am Forum vorgenommen werden, die sich für uns nicht wirtschaftlich abbilden lassen. Daher haben wir uns entschlossen, das Forum in seiner aktuellen Form zu archivieren und online bereit zu stellen, jedoch keine Neuanmeldungen oder neuen Kommentare mehr zuzulassen. So ist sichergestellt, dass das gesammelte Wissen nicht verloren geht, und wir die Seite dennoch DSGVO-konform zur Verfügung stellen können.
    Dies wird in den nächsten Tagen umgesetzt.

    Ich danke allen, die sich in den letzten Jahren für Hilfesuchende und auch für das Forum selbst engagiert haben. Ich bin weiterhin für euch erreichbar unter tti(bei)pcwelt.de.
    Dismiss Notice
Ergänzung Rechnerkonfiguration Wir stellen um auf Read only

Kann keine DVD's mehr erfolgreich brennen

Discussion in 'Festplatten, SSD, USB-Sticks, CD/DVD/Blu-ray' started by JoSbg, Jan 4, 2008.

Thread Status:
Not open for further replies.
  1. JoSbg

    JoSbg Byte

    Hi

    Seit kurzer Zeit werden keine DVD's mehr erfolgreich fertig gebrannt. Bei Nero bricht der Prozess meist vor 50% ab und es kommt folgende Fehlermeldung:
    "DMA-Treiberfehler. CRC-Fehler (E: ATAPI DVD DH20A4P)"

    Weiter unten noch der komplette Fehler-Log.

    Hab gedacht, dass mein schon älterer Toshiba Brenner das Problem ist. Daher hab ich gestern einen neuen LiteOn-Brenner gekauft, aber da ist das gleich Problem wieder.
    Die Brenner hängen beide am IDE.

    Was ist das Problem???

    Danke.
    Jo

    Proz.:Intel Core2Duo 2GHZ (E4400)
    MB :ECS 671T-M
    FP: Samsung 400GB SATA (HD403LJ)
    DVD-Brenner: Toshiba SD-R5112 /// LiteOn DH-20A4P
    System: XP SP2


    NT-SPTI used
    Nero Version: 8.1.1.4
    Internal Version: 8, 1, 1, 4

    Recorder: <ATAPI DVD A DH20A4P> Version: NP53 - HA 1 TA 0 - 8.1.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default
    CD-ROM: <ATAPI DVD A DH20A4P >Version: NP53 - HA 1 TA 0 - 8.1.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    CdRomPeripheral : ATAPI DVD A DH20A4P atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-R5112 atapi Port 0 ID 1 DMA: On
    DiskPeripheral : SAMSUNG HD403LJ atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    ATAPI DVD A DH20A4P E: CdRom0
    TOSHIBA DVD-ROM SD-R5112 D: CdRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1023MB (1047788kB)
    Free physical memory: 569MB (583392kB)
    Memory in use : 44 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    4.1.2008
    UDF Zusammenstellung
    14:42:19 #1 Text 0 File SCSIPTICommands.cpp, Line 450
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    14:42:19 #2 Text 0 File Isodoc.cpp, Line 6671
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : pure
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical

    14:42:19 #3 Text 0 File Burncd.cpp, Line 3530
    Turn on Disc-At-Once, using DVD media

    14:42:54 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
    FS Settings: using validator 'CUDFSettingsValidatorDVD'
    ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
    Changing UDF revision from '1.02' to '1.02'

    14:42:56 #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2236383 (496:58.33, 4367MB)

    14:42:56 #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    14:42:56 #7 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: ATAPI DVD A DH20A4P, Media type: DVD-R
    Disc Manufacturer ID: <DAXON0> <08S>
    Disc Application Code: 64, Disc Physical Code: 193

    14:42:56 #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unbekannt. Medium required by compilation: DVD R/RW; DVD DL; DVD-RAM.)

    14:42:56 #9 Text 0 File ThreadedTransferInterface.cpp, Line 785
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2236384 (2236384) = #2236384/496:58.34
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2236384 blocks [E: ATAPI DVD A DH20A4P]
    --------------------------------------------------------------

    14:42:56 #10 Text 0 File ThreadedTransferInterface.cpp, Line 986
    Prepare [E: ATAPI DVD A DH20A4P] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4580114432, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2236384 | 0 | 0x00
    2236384 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    14:42:56 #11 Text 0 File SCSIPTICommands.cpp, Line 240
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    14:42:56 #12 Text 0 File Burncd.cpp, Line 4316
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    14:42:56 #13 Phase 24 File dlgbrnst.cpp, Line 1764
    Caching of files started

    14:42:56 #14 Text 0 File Burncd.cpp, Line 4435
    Cache writing successful.

    14:42:56 #15 Phase 25 File dlgbrnst.cpp, Line 1764
    Caching of files completed

    14:42:56 #16 Phase 36 File dlgbrnst.cpp, Line 1764
    Burn process started at 4x (5.540 KB/s)

    14:42:56 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2735
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    14:42:56 #18 Text 0 File DVDR.cpp, Line 3245
    Recording mode: Sequential Recording Mode

    14:42:56 #19 Text 0 File DVDR.cpp, Line 3401
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    14:42:56 #20 Text 0 File Cdrdrv.cpp, Line 10026
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    Outer Limit of Data Recordable Area: 26127F h
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: -
    Revision number of minimum recording speed: -
    Revision number table of recording speed: - - - - - - -
    Class: 0, Extended part version: 0
    Start PSN of the Extra Border Zone: 0 h
    Start PSN of Physical format information blocks in Extra Border Zone: 0 h
    Media Specific [16..783]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    01 40 C1 FD 9E D8 52 00 - 02 85 0E 10 87 88 80 00 .@....R.........
    03 44 41 58 4F 4E 30 00 - 04 30 38 53 00 00 00 00 .DAXON0..08S....
    05 88 80 00 00 00 01 00 - 06 09 0C 12 A8 88 90 00 ................
    07 88 80 00 00 00 00 00 - 08 06 16 0A 0E 09 04 00 ................
    09 98 06 0C 0B 70 88 00 - 0A 80 00 00 00 00 10 00 .....p..........
    0B 08 16 18 97 88 75 00 - 0C B7 9B B8 83 00 30 00 ......u.......0.
    0D 0F FF D0 00 00 00 00 - 0E 09 1F 39 35 29 1C 00 ...........95)..
    0F 50 1B 29 19 AA B5 00 - 10 88 84 00 04 00 04 00 .P.)............
    11 00 00 00 00 00 00 00 - 12 09 2C 37 31 29 1C 00 ..........,71)..
    13 50 1F 2D 1F 99 B5 00 - 14 88 84 00 04 00 04 00 .P.-............
    15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    14:42:56 #21 Text 0 File ThreadedTransfer.cpp, Line 268
    Pipe memory size 83836800

    14:43:18 #22 Text 0 File Cdrdrv.cpp, Line 1367
    14:43:18.187 - &#14917;&#16672;&#16724;&#18768;&#17440;&#17494;&#16672;†&#18500;&#12338;&#13377;P : Queue again later

    14:43:42 #23 SPTI -1502 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x08
    Sense Qual: 0x03
    CDB Data: 0x2A 00 00 00 05 A0 00 00 20 00 00 00
    Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
    Buffer x09670b80: Len x10000
    0x00 00 01 BA 44 00 77 E5 CC 69 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 64 39 AA E2 CC 3D B4 EC 3E
    0x33 AD B5 08 47 46 E3 74 80 0B A0 03 D0 4D 00 D0

    14:43:42 #24 CDR -1502 File Writer.cpp, Line 306
    DMA-driver error, CRC error
    E: ATAPI DVD A DH20A4P

    14:47:07 #25 Text 0 File DVDR.cpp, Line 3803
    EndDAO: Last written address was 1439 (59Fh)

    14:47:07 #26 Phase 38 File dlgbrnst.cpp, Line 1764
    Burn process failed at 4x (5.540 KB/s)

    14:47:07 #27 Text 0 File SCSIPTICommands.cpp, Line 287
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    14:47:10 #28 Text 0 File Cdrdrv.cpp, Line 11276
    DriveLocker: UnLockVolume completed

    14:47:10 #29 Text 0 File SCSIPTICommands.cpp, Line 450
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
     
    JoSbg, Jan 4, 2008
    #1
Thread Status:
Not open for further replies.

Share This Page