LG GSA-H20L urplötzlich Spurprobleme

Hallo Leute,

mein DVD Brenner macht urplötzlich Probleme beim Brennen.

Fehlermeldung am Ende des Brennvorgangs:

!Fehler beim verfolgen der Spur

Die beiden Brenner hängen am sekundären Port, entsprechend als Master und Slave gejumpert. Als Brennsoftware habe ich Nero 7.0 Premium mit aktuellen Upgrade.

Anbei die Daten der Nero LOG Datei, falls jemand sich damit auskennen sollte und ggf. einen Fehler ableiten kann. Kann es sein, dass dieser Fehler ggf. ein typischer Brennerfehler ist wenn dieser den Geist aufgibt? Oder liegt hier eher ein Treiberfehler vor?

Gruß

wer_pa



NERO LOGDATEI
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32

NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0

Recorder: <HL-DT-ST DVD-RAM GSA-H20L>Version: 1.01 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RAM GSA-H20L>Version: 1.01 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC35L040AVVA07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : HDS728080PLAT20 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H20L atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H20L J: CDRom0
HL-DT-ST DVDRAM GSA-4081B K: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 639MB (654880kB)
Free physical memory: 126MB (129904kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.10.2006
CD-ROM (ISO)
13:15:52 #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

13:15:52 #2 Text 0 File Isodoc.cpp, Line 6508
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13:15:52 #3 Text 0 File Burncd.cpp, Line 3133
HL-DT-ST DVD-RAM GSA-H20L
Schutz vor Pufferleerlauf aktiviert

13:15:52 #4 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)

13:15:52 #5 Text 0 File Burncd.cpp, Line 3435
Turn on Track-At-Once, using CD-R/RW media

13:15:53 #6 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 99580 ( 22:09.55)

13:15:53 #7 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO (enabled: CD DVD)

13:15:53 #8 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: HL-DT-ST DVD-RAM GSA-H20L;
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 16 43 (LI 97:22.67), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

13:15:53 #9 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:15:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 99581 (99581) = #99581/22:7.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 99579 blocks [Main]
--------------------------------------------------------------

13:15:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [HL-DT-ST DVD-RAM GSA-H20L] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 204249088, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 99581 | -150 | 0x00
0 | 1 | 1 | 0x41 | 99581 | 0 | 0x00
99581 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

13:15:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1104
Removed 2 run-out blocks from end of track 1. Length: 99581 -> 99579.

13:15:53 #13 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:15:53 #14 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

13:15:53 #15 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.

13:15:53 #16 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

13:15:53 #17 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 48x (7.200 KB/s)

13:15:53 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:15:53 #19 Text 0 File MMC.cpp, Line 22124
Set BUFE: Buffer underrun protection -> ON

13:17:24 #20 Text 0 File MMC.cpp, Line 16956
<HL-DT-STDVD-RAM GSA-H20L> start Close Session

13:18:31 #21 SPTI -1119 File SCSIPassThrough.cpp, Line 293
J: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 09
Buffer x0493a200: Len x20

13:18:31 #22 CDR -1119 File ThreadedTransferInterface.cpp, Line 1281
Track following error
J: HL-DT-ST DVD-RAM GSA-H20L

13:18:31 #23 Text 0 File MMC.cpp, Line 16956
<HL-DT-STDVD-RAM GSA-H20L> start Close Session

13:18:31 #24 SPTI -1047 File SCSIPassThrough.cpp, Line 293
J: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 64

13:18:31 #25 CDR -1047 File ThreadedTransferInterface.cpp, Line 1281
Illegal mode for this track
J: HL-DT-ST DVD-RAM GSA-H20L

13:18:31 #26 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 48x (7.200 KB/s)

13:18:31 #27 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed

13:18:31 #28 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 5, 0, 5, size=102912 bytes, created 25.07.2006 15:51:56 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 5, 0, 5, size=31488 bytes, created 25.07.2006 15:52:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 5, 0, 5, size=10624 bytes, created 25.07.2006 15:52:08 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Hallo,
ähnliches Problem hatte ich mit dem Brennen unter Nero7 auch(habe LG 4163B), allerdings ohne Fehlermeldung. Der Brenner hing sich aber auf. Habe Nero7 endgültig von meinem System, nach letztmaligem Versuch,verbannt. Nur Probleme mit dieser Version gehabt. Mit Nero 6 stellte das Brennen überhaupt kein Problem dar. Ansonsten mal mit einem anderen Brennprogramm z.B. Clone DVD2 probiert? Oder anderen Rohling? Aber vielleicht, was ich natürlich nicht hoffe, hat dein Brenner ja tatsächlich einen Defekt:nixwissen

 

Hallo,

ich habe das gleiche Problem - auch ähnlich viele Rohling verheizt. ging weder unter neo 6, noch unter Nero 7 Premium.

Hat sich bei Dir das Problem inzwischen gelöst??? Wenn JA wie???

Gruß
René