1. Bitte immer die Rechnerkonfiguration komplett posten!
    Vollständige Angaben zur Konfiguration erleichtern die Hilfestellung und machen eine zügige Problemlösung wahrscheinlicher. Wie es geht steht hier: Klick.
    Dismiss Notice
  2. Liebe Forumsgemeinde,

    aufgrund der Bestimmungen, die sich aus der DSGVO ergeben, müssten umfangreiche Anpassungen am Forum vorgenommen werden, die sich für uns nicht wirtschaftlich abbilden lassen. Daher haben wir uns entschlossen, das Forum in seiner aktuellen Form zu archivieren und online bereit zu stellen, jedoch keine Neuanmeldungen oder neuen Kommentare mehr zuzulassen. So ist sichergestellt, dass das gesammelte Wissen nicht verloren geht, und wir die Seite dennoch DSGVO-konform zur Verfügung stellen können.
    Dies wird in den nächsten Tagen umgesetzt.

    Ich danke allen, die sich in den letzten Jahren für Hilfesuchende und auch für das Forum selbst engagiert haben. Ich bin weiterhin für euch erreichbar unter tti(bei)pcwelt.de.
    Dismiss Notice
Ergänzung Rechnerkonfiguration Wir stellen um auf Read only

LG GSA-H22L Buffer-Problem

Discussion in 'Festplatten, SSD, USB-Sticks, CD/DVD/Blu-ray' started by indeli, Dec 10, 2006.

Thread Status:
Not open for further replies.
  1. indeli

    indeli ROM

    Hi!
    Problem: Mein LG GSA-H22L verweigert hartnäckig das Brennen von DVD's mit der Meldung "Buffer zu gross". Firmware laut LG-Firmware-Update auf neuestem Stand. "Normale" CD-Roms funktionieren auch problemlos. Kann jemand das Fehler-Log interpretieren???
    Gruß indeli

    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

    NT-SPTI used
    Nero Version: 7.5.9.0
    Internal Version: 7, 5, 9, 0

    Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.00 - HA 1 TA 0 - 7.5.9.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.00 - HA 1 TA 0 - 7.5.9.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-STDVD-RAM GSA-H22L1.00 viadsk Port 0 ID 1 DMA: Off
    DiskPeripheral : SAMSUNG SP0802N TK10 viadsk Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RAM GSA-H22L E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    BUFE : 0
    Physical memory : 383MB (392692kB)
    Free physical memory: 132MB (135384kB)
    Memory in use : 65 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.12.2006
    ISO Zusammenstellung
    11:32:39 #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    11:32:39 #2 Text 0 File Isodoc.cpp, Line 6509
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    11:32:40 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
    First writeable address = 0 (0x00000000)

    11:32:40 #4 Text 0 File Burncd.cpp, Line 3451
    Turn on Disc-At-Once, using DVD media

    11:32:40 #5 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 534735 (118:49.60, 1044MB)

    11:32:40 #6 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    11:32:40 #7 Text 0 File DlgWaitCD.cpp, Line 2903
    Recorder: HL-DT-ST DVD-RAM GSA-H22L, Media type: DVD+R
    Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    11:32:40 #8 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:32:40 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 534736 (534736) = #534736/118:49.61
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 534736 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
    --------------------------------------------------------------

    11:32:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
    Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1095139328, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 534736 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 534736 | 0 | 0x00
    534736 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    11:32:40 #11 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    11:32:40 #12 Phase 36 File dlgbrnst.cpp, Line 1746
    Burn process started at 8x (11.080 KB/s)

    11:33:44 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2743
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:33:44 #14 Text 0 File Cdrdrv.cpp, Line 9234
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MCC.....
    Media type ID: 004
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
    23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    11:33:44 #15 Text 0 File DVDPlusRW.cpp, Line 674
    Start write address at LBA 0
    DVD high compatibility mode: No

    11:33:45 #16 SPTI -31 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
    Buffer x080a0040: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    11:33:45 #17 SPTI -31 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
    Buffer x06d69c40: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    11:33:45 #18 Text 0 File MMC.cpp, Line 19912
    Writer-Buffer for E: HL-DT-ST DVD-RAM GSA-H22L reduced to 32768Bytes

    11:33:45 #19 SPTI -31 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
    Sense Key: 0x00 (KEY_NO_SENSE)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 10 00 00 00
    Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
    Buffer x06d69c40: Len x8000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    11:33:45 #20 CDR -31 File Writer.cpp, Line 299
    Buffer too large
    E: HL-DT-ST DVD-RAM GSA-H22L
    11:33:45 #21 Phase 38 File dlgbrnst.cpp, Line 1746
    Burn process failed at 8x (11.080 KB/s)

    11:33:45 #22 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    11:33:45 #23 Text 0 File Cdrdrv.cpp, Line 10467
    DriveLocker: UnLockVolume completed

    11:33:45 #24 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\CDR4_2K.SYS': Ver=8.0.0.212 , size=2432 bytes, created 19.05.2006 22:16:24
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19.05.2006 22:16:24
    File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16.05.2006 21:23:54 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    indeli, Dec 10, 2006
    #1
  2. JurTech

    JurTech Kbyte

    Wenn ich mich in dem Log-Wust nicht verlesen habe, läuft Dein H22L im PIO-Mode anstelle von UDMA.
    Ändere das erstmal und probiere es wieder.
    Ergebnis ggfls. hier posten.

    Oder/Und hast Du bei Nero 7.x dessen Buffergröße auf ein utopisches Maximum gestellt?
     
    JurTech, Dec 13, 2006
    #2
  3. indeli

    indeli ROM

    Danke für den Tipp!! :bet:

    Ich Depp hatte übersehen, dass im BIOS UDMA disabled war.
    Umgestellt-->ausprobiert-->Feuer frei-->Freude!!! :D

    Also Danke nochmal

    Indeli
     
    indeli, Dec 17, 2006
    #3
Thread Status:
Not open for further replies.

Share This Page