1. Liebe Forumsgemeinde,

    aufgrund der Bestimmungen, die sich aus der DSGVO ergeben, müssten umfangreiche Anpassungen am Forum vorgenommen werden, die sich für uns nicht wirtschaftlich abbilden lassen. Daher haben wir uns entschlossen, das Forum in seiner aktuellen Form zu archivieren und online bereit zu stellen, jedoch keine Neuanmeldungen oder neuen Kommentare mehr zuzulassen. So ist sichergestellt, dass das gesammelte Wissen nicht verloren geht, und wir die Seite dennoch DSGVO-konform zur Verfügung stellen können.
    Dies wird in den nächsten Tagen umgesetzt.

    Ich danke allen, die sich in den letzten Jahren für Hilfesuchende und auch für das Forum selbst engagiert haben. Ich bin weiterhin für euch erreichbar unter tti(bei)pcwelt.de.
    Dismiss Notice

Palimpsest findet 3 defekte Sektoren badblocks und smart aber nicht.

Discussion in 'Linux-Distributionen' started by qqqaqqq, Jan 25, 2010.

Thread Status:
Not open for further replies.
  1. qqqaqqq

    qqqaqqq Megabyte

    Wem soll ich glauben?

    Code:
    root@patrick-laptop:~# smartctl -a /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST9250315AS
Serial Number:    6VC0P29H
Firmware Version: 0001SDM1
User Capacity:    250,059,350,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Mon Jan 25 03:08:53 2010 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (   0) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  70) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x103b)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   116   092   006    Pre-fail  Always       -       105243256
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       275
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       2
  7 Seek_Error_Rate         0x000f   067   060   030    Pre-fail  Always       -       5385162
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       519
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   037   020    Old_age   Always       -       230
184 Unknown_Attribute       0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       270
188 Unknown_Attribute       0x0032   100   096   000    Old_age   Always       -       30065295912
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   061   057   045    Old_age   Always       -       39 (Lifetime Min/Max 24/43)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       8
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       1
193 Load_Cycle_Count        0x0032   094   094   000    Old_age   Always       -       13642
194 Temperature_Celsius     0x0022   039   043   000    Old_age   Always       -       39 (0 15 0 0)
195 Hardware_ECC_Recovered  0x001a   050   042   000    Old_age   Always       -       105243256
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
254 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 265 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 265 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 8f e5 68 0e

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 8f e5 68 4e 00      00:06:32.061  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:06:32.061  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:06:32.060  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:06:32.059  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:06:32.059  READ NATIVE MAX ADDRESS EXT

Error 264 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 8f e5 68 0e

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 8f e5 68 4e 00      00:06:29.685  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:06:29.685  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:06:29.683  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:06:29.683  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:06:29.682  READ NATIVE MAX ADDRESS EXT

Error 263 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 8f e5 68 0e

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 8f e5 68 4e 00      00:06:27.395  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:06:27.395  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:06:27.393  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:06:27.393  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:06:27.392  READ NATIVE MAX ADDRESS EXT

Error 262 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 8f e5 68 0e

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 8f e5 68 4e 00      00:06:25.030  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:06:25.029  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:06:25.028  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:06:25.027  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:06:25.027  READ NATIVE MAX ADDRESS EXT

Error 261 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 8f e5 68 0e

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 8f e5 68 4e 00      00:06:22.737  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:06:22.737  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:06:22.735  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:06:22.735  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:06:22.734  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance offline  Completed without error       00%       351         -
# 2  Extended offline    Completed without error       00%       317         -
# 3  Short offline       Completed without error       00%         1         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@patrick-laptop:~#
    Habe badblocks zweimal ausgeführt Resultat nichts.

    Interessant dabei Gestern war es nur 1 defekter Sektor heute sollen es gleich 3 sein.

    Wie kann ich zweifelsfrei einen Schaden ausschließen.

    [​IMG]
     
    Last edited: Jan 25, 2010
    qqqaqqq, Jan 25, 2010
    #1
  2. qqqaqqq

    qqqaqqq Megabyte

    Das zum Thema ext4 Dateisystemfehler.
    Lesefehlerrate 130204720 Grenzwert 6
    Start/Stopp-Zähler 279 Grenzwert 20
    Defekte Sektoren mittlerweile 4
    Suchfehlerrate 5442856 Schlechtester Wert 60 Grenzwert 30
    Betriebsstunden 22 Tage
    Fehlerrate durch Stoßerkennung 8
    Parkvorgänge in Ruhezone 13725 Schlechtester Wert 94
    Durch Hardware (ECC) korrigierte Bitfehler 130204720 Schlechtester Wert 42
    Mir gehts gerade wie Thom Hanks im Film Geschenkt ist noch zu teuer mit einer Ausnahme ich wusste das der Laptop Ausschussware ist. 150 Laptop hat du UNI Graz gekauft 10 sind zurück gekommen, einen davon hab ich. Jetzt bitte kein Gelächter, hatte ich deswegen schon :D
    Ich glaub man kann den Thread schließen, ich schau heute noch bei Will haben wegen einer Gebrauchten Festplatte nach.

    Edit: Der Laptop hat 470€ gekostet konnte nicht widerstehen.
     
    Last edited: Jan 25, 2010
    qqqaqqq, Jan 25, 2010
    #2
  3. neppo1

    neppo1 Halbes Gigabyte

    Zur not geht es auch mit einer Externen HD
     
    neppo1, Jan 26, 2010
    #3
  4. qqqaqqq

    qqqaqqq Megabyte

    Ach nee das ist bei einem Laptop im Mobielen Einsatz nicht Praktikabel.

    Was meint ihr wie viel GB soll die neu SATA haben. Eingebaut ist eine 250 GB Seagate.

    BIOS: Phoenix SecureCore (tm) Setup Utility
    System BIOS Version: V0.3219
    VGA BIOS Version: Montevina 1744
     
    qqqaqqq, Jan 26, 2010
    #4
Thread Status:
Not open for further replies.

Share This Page