Pc hakt und weitere Probleme

Hallo,

Wie schon gesagt hab da mehrere Probleme:

1. Stockt mein Pc andauernd, hab alle paar minuten beio egal welches programm ich grade offen habe keine Rückmeldung mehr, das dauert dann 5-7 sek an und dann geht wieder alles für 2 min.

2. Ich bekomme nur noch weiße Symbole (Papier) angezeigt, egal welches Programm! siehe Screenshot

für jede Hilfe dankbar!

 

Wie sind Temperaturen und Spannungen laut Speefan und HW-Monitor?
http://www.computerbase.de/downloads/software/systemueberwachung/speedfan/
http://www.computerbase.de/downloads/software/systemueberwachung/hwmonitor/

 

hab ich schon von nem anderen Forum überprüfen lassen, die waren im grünen Bereich die Temperaturen, checke aber jetzt mal ob Festplatte nicht kaputt ist

 

Weiße Symbole gibt es, wenn dieser Fix-it-Workaround angewendet ist.
http://windowsblog.freenet.de/2010/...fentlicht-fix-it-workaround-gegen-lnk-luecke/

 

hmm, hat den Microsoft vllt selbst installiert? weil ich kenn den net

wie ist das jetzt mit dem zweiten Problem?

vllt hilft ihnen das hier, ist die auswertung der festplattenüberprüfung


smartctl 5.39.1 2010-01-28 r3054 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green family
Device Model: WDC WD15EADS-00P8B0
Serial Number: WD-WCAVU0402530
Firmware Version: 01.00A01
User Capacity: 1.500.300.828.160 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Aug 14 21:38:59 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (33000) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 180 179 021 Pre-fail Always - 5958
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 723
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1359
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 566
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 168
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 8630
194 Temperature_Celsius 0x0022 114 108 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 1359 44122273
# 2 Conveyance offline Completed: read failure 90% 1359 44122273
# 3 Short offline Completed: read failure 90% 1359 44122273

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

Zum S.M.A.R.T. auslesen benutze ich Crystal Disk Info unter Windows.
Kaspersky Internet Security kann das Stocken verursachen.