ram im bios richtig einstellen

Hallo Leute , wie stelle ich meinen Ram im bios richtig ein ??
Hier meine Daten :
SiSoftware Sandra

System
Manufacturer : MSI
Model : MS-6380E
Version : 1.0
Serial Number : 00000000
ID : 00000000-00000000-00000000-00000000

System Chassis
Manufacturer : Uknown Chassis Manufacture
Type : Desktop
Can be locked : No
Version : Version 1.00
Serial Number : 123456890
Asset Tag : 0123ABC

Mainboard
Manufacturer : MSI
MP Support : 1 CPU(s)
MPS Version : 1.40
Model : MS-6380E
Version : 1.0
Serial Number : 00000000

Memory Controller
Error Detection Method : ECC
Error Correction Capability : 1-bit
Supported/Current Memory Interleave : 1-way / 1-way
Number of Memory Slots : 3
Maximum Installable Memory : 3072MB
Maximum Module Size : 1024MB
Supported STD/FPM/(B)EDO Speeds : 70ns, 60ns
Supported Memory Types : STD, FPM, EDO, Parity, ECC, SIMM
Supported Memory Voltages : +3.3V

Physical/BIOS Memory Banks
DIMM1 (RASL-1 RASL-0) : 256MB DIMM SDRAM single-bank
DIMM2 (RASL-3 RASL-2) : 256MB DIMM SDRAM single-bank
DIMM3 (RASL-5 RASL-4) : 512MB DIMM SDRAM double-bank

Chipset 1
Model : VIA Technologies Inc VT8366/A,VT8367 Apollo KT266/A,KT333 CPU to PCI Bridge
Bus(es) : ISA AGP PCI IMB USB i2c/SMBus
Front Side Bus Speed : 2x 133MHz (266MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 166MHz / 2x 166MHz
Width : 64-bit
IO Queue Depth : 4 request(s)

Chipset 1 Hub Interface
Type : V-Link
Width : 8-bit
Full Duplex : Yes
Multiplier : 1/1x
Speed : 4x 66MHz (264MHz data rate)
IO Queue Depth : 9 request(s)

Logical/Chipset 1 Memory Banks
Bank 0 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Bank 2 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Bank 4 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Bank 5 : 256MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Speed : 2x 166MHz (332MHz data rate)
Multiplier : 5/4x
Width : 64-bit
Power Save Mode : No
Fixed Hole Present : No

APIC 1
Version : 0.03
Speed : 16MHz
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes

Memory Module(s)
Memory Module 1 : 256MB 8x(32Mx8) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz) (CL2 up to 133MHz)
Memory Module 2 : 256MB 8x(32Mx8) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz)
Memory Module 3 : Siemens 64D64320GU5B 0200EB11 512MB 16x(32Mx8) DDR-SDRAM PC3200U-333-500 (CL3 up to 200MHz) (CL2.5 up to 167MHz) (CL2 up to 133MHz)

System Clock Generator
Model : ICS 94228
Software Programmable : Yes
Read-Back Support : Yes
Speed Selected By : Software
Spread Spectrum Modulated : Yes
Number of FSB Speeds : 32
FSB Speed Range : 67 - 233MHz

Environment Monitor 1
Model : Winbond W83697HF ISA
Version : 6.00
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 37.0°C / 98.6°F
CPU Temperature : 40.5°C / 104.9°F

Cooling Device(s)
Auto Fan Speed Control : No
Chassis Fan Speed : 2860rpm
CPU Fan Speed : 1740rpm

Voltage Sensor(s)
CPU Voltage : 1.58V
+3.3V Voltage : 3.23V
+5V Voltage : 4.97V
+12V Voltage : 12.34V
-12V Voltage : -11.87V
-5V Voltage : -5.10V
Standby Voltage : 4.97V
Battery Voltage : 3.39V

AGP Bus(es) on Hub 1
Version : 2.00
Speed : 4x 66MHz (264MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : No
Side Band Enabled : Yes
Aperture Size : 128MB

PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (33MHz)
Multiplier : 1/4x

LPC Hub Controller 1
Model : VIA Technologies Inc VT8235 PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Multiplier : 1/4x
Speed : 8MHz
DMA Multiplier : 1/2x
DMA Speed : 4MHz

USB Controller 1
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 3
Model : VIA Technologies Inc VT6202 USB 2.0 Enhanced Host Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 4
Companion Controllers : 2
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : VIA VT823x SMBus
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 16kHz

Expansion Slot(s)
PCI1 (1h) : PCI 32-bit +3.3V Shared PME Full-Length Available (VIA Technologies Inc VT8366/A,VT8367 Apollo KT266/A,KT333 PCI to AGP Bridge)
PCI2 (2h) : PCI 32-bit +3.3V Shared PME Full-Length Used
PCI3 (3h) : PCI 32-bit +3.3V Shared PME Full-Length Used
PCI4 (4h) : PCI 32-bit +3.3V Shared PME Full-Length Available
PCI5 (5h) : PCI 32-bit +3.3V Shared PME Full-Length Available
AGP (3h) : AGP-4x 32-bit +3.3V Shared PME Full-Length Used

Port Connector
USB - Def : SSA SCSI - Mini Centronics / DB-25 pin male

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive.
Warning 2545 : Large memory modules should be Registered/Buffered.
Tip 2546 : Large memory modules should be ECC/Parity.
Tip 2548 : Speed set by software. For reliability, consider by jumpers/switch.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
Warning 2519 : One of the system fans has failed or is spinning too slowly.


Habe da Optionen wie , spd, hlkc und so weiter
Wie ist es am besten ???
Gruss
Holle